skip to Main Content
  1. Prepare goods as necessary.
  2. Set bath at 110°F(43°C) containing:
    • 1.0 % owg     Leveler
    • 1.0 % owg     Acetic Acid 56%
    • X % owg     lubricant if necessary
  1. Circulate for 10 minutes.
  2. Prepare Orcolan Neutral™ dye solution.
  3. Raise dyebath temperature to 130-140°F(54-60°C) and add dye solution.
  4. Circulate for 10 minutes.
  5. Raise temperature to 205°F(96°C) at a rate of 3°F per minute.
  6. Run goods for 30 minutes and turn off steam.
  7. Slowly add Acetic Acid 56% to a pH of 4.5 .
  8. Continue dyeing for 45-60 minutes.
  9. Drop bath and overflow rinse at 150°F(66°C) for 20 minutes.
  10. After-treat if necessary.

Download This Information

Back To Top