Orco Dye Carrier LLRS-2™
Orco Dye Carrier LLRS-2™ is a low-odor dye carrier for atmospheric dyeing and high temperature leveling of polyester.
Physical Properties
Appearance | Slightly yellow liquid |
Ionic charge | Nonionic/anionic |
Chemical type | Alkyd amide blend |
Stability | Protect from excessive heat and cold |
Advantages
- Excellent yield
- Good leveling properties
- Ease of use
- Very low odor
Procedures
Atmospheric
Prepare bath with the following:
- 6.0 – 9.0% Orco Dye Carrier LLRS-2™ * on weight of goods (owg)
- X% owg Glacial Acetic Acid 50% to pH of 4.5 – 5.0
Circulate for 10 minutes at 100-110°F(38-43°C).
Add Orcocilacron™ disperse dye and bring temperature to 208°F (98°C) and run for 60 minutes.
Drop bath, rinse well, and dry. *Dependent on depth of shade.
High Temperature
Same procedure as listed above with the following changes:
2.0% – 4.0% owg Orco Dye Carrier LLRS-2™, X% owg Glacial Acetic Acid 56% to pH of 2.5 – 5.0
Run at 265°F(130°C) for 45 minutes.
On heavy shades, the use of Orco Synclear PC will help remove any loose dye and improve crocking.